
How To Clean Pool Sand FiltersFILTER FREE is effective in removing scale, rust, cosmetics, oils, etc. which commonly reduce the performance of sand, diatomite, and cartridge filters. It's dry granular form makes it easy to use with greater handling safety. PRECAUTIONS: DO NOT LET THE PUMP RUN DRY. DO NOT BACKWASH INTO POOL, OVER GRASS OR DESIRABLE PLANTS. Preparation • Backwash filter normally. • Leave handle in backwash position. • Shut off pump. • Remove pump hair & lint pot cover. • Remove filter drain plug. • Allow water to drain from filter. • Replace drain plug securely. Application of Cleaner • Fill a plastic pail with warm tap water • Add FILTER FREE according to directions on bottle to warm tap water while • Turn on the pump make sure that the filter handle is in backwash position. • Slowly pour FILTER FREE solution into hair & lint pot with pump running. • CAUTION: DO NOT let pump run dry between buckets of water. • Continue to add warm water using two or more buckets full, until sand is • CAUTION: shut off pump at once, leave handle in backwash position, allow Resume Normal Operation of Filter • Prime pump and backwash for 6 minutes or until water coming from backwash line is clear. • NOTE: DO NOT allow solution to get into pool. • Shut off power to the pump, put handle in filter position and restart the pump. |
|
Pioneer Family Pools now offers patio furniture, patio furniture accessories, billiards and fitness equipment, including home gyms, and treadmills at selected locations below, this compliments our wide selection of hot tubs, spas, inground swimming pools and above ground swimming pools.
Copyright © 2012 Pioneer Family Pools
Site designed and maintained by bbandm advertising+media